Posts tagged #stair code
15 articles tagged with “stair code”.

Wall-Mounted Handrail vs Guard-Mounted Handrail: Which Side and Height
Compare wall-mounted and guard-mounted handrails: which side the rail goes on, the 34 to 38 inch height rule, grip and clearance numbers, and the errors that fail inspection.
Read More
Egress Windows at Stair Landings: When Code Requires a Second Exit
When does a basement stair landing need an egress window? IRC R310 size, sill height, window well, and ladder rules explained with the mistakes that fail inspection.
Read More
Bilco Doors and Basement Stair Bulkheads: Sizing and Installation
A basement bulkhead stair that fits right is safe, dry, and easy to use. This guide shows how to measure the opening, size the stair and headroom, pick the right Bilco door, and install it without leaks.
Read More
Stair Nosing Profiles for Tile Stairs: Metal Edges and Code
Metal nosing profiles protect tile stair edges from chips, add grip, and keep the stair inside IRC nosing limits. Learn the profiles, code numbers, and install steps.
Read More
Staircase Fire Blocking Between Floors: What Code Requires
Fire blocking closes the hidden cavities around a staircase so fire cannot travel floor to floor inside the framing. Here is where IRC requires it, which materials qualify, and how to install it.
Read More
How to Add a Mid-Flight Landing to an Existing Staircase
A mid-flight landing splits a long stair into two comfortable flights. Learn code sizes, riser splits, landing framing, and handrail rules for a safe retrofit.
Read More
Do I Need a Permit to Build or Replace Stairs?
A permit guide by project type: new stairs, replacements, and simple repairs, with the code numbers inspectors measure and a checklist for checking your local rules.
Read More
How to Measure Stairs Before You Calculate: Total Rise, Run, Width and Stringer Checks
Measure stairs correctly before calculating: total rise, total run, width, headroom, and stringer checks, with IRC code references and a clean measurement worksheet.
Read More
How Many Steps Do I Need for a 10-Foot Ceiling?
16 steps at a 7.5-inch riser or 17 steps at 7.06 inches: that is the answer for a 10-foot ceiling. See the exact riser math, total run, and IRC code checks.
Read More
How Many Steps Do I Need for a 9-Foot Ceiling?
How many steps do you need for a 9-foot ceiling? The full riser-count formula, a worked example with real numbers, total run, and IRC code checks.
Read More
How to Inspect a Staircase Before Buying a House
A 15-minute home-buyer staircase checklist: check riser and tread consistency, headroom, handrails, baluster spacing, and structural warning signs against IRC code rules before you make an offer.
Read More
Ship Stairs and Alternating Tread Devices: When Code Allows Them
Ship stairs and alternating tread devices can legally reach a loft or mezzanine where a full stair will not fit. Here are the IRC rules, exact dimensions, and space-saving math.
Read More
Garage Entry Stairs: Code Requirements and Build Guide
Garage entry stairs face two rulebooks: IRC stair geometry and garage fire separation. This guide covers riser and tread limits, the garage landing exception, handrails, guards, and fire door rules, with a worked layout example.
Read More
Winder Tread Layout Math: The 6-Inch Walk-Line Rule
Code-correct winder tread layout: IRC 6-inch narrow-end minimum, 10-inch walk-line rule, and step-by-step 90-degree turn math with a worked example.
Read More
Open Riser Stairs: Code Rules and the 4-Inch Sphere Test
Open riser stairs look modern, but they pass code only when the gap between treads blocks a 4-inch sphere. Here is the exact IRC rule, how to test every step the way an inspector does, and where open risers are banned.
Read More